COMPRESSION PACKING
General Service Packings
Style 528 Flax - Tallow | ||
 | Flax fiber packing lubricated with tallow and wax. Used for brine, cold water and oil service. Ideal for marine applications. |
|
Style 531 Flax - Petroleum | ||
 | A flax fiber packing, treated with a petroleum-based lubricant and surface graphited. |
|
Style 1398 Syntex | ||
 | This syntex fiber packing is thoroughly impregnated with a high temperature lubricant. The finished packing is surface graphited. This packing is an asbestos replacement packing for general service use on pumps and valves. |
|
| Available with a Moly Lubricant - Style 1398 MOLY | ||
|---|---|---|
Style 1430 Syntex | ||
 | A syntex fiber packing treated with a high temperature lubricant and graphited. This packing is soft and pliable for general service on pumps and valves. |
|
| Available with a Moly Lubricant - Style 1430 MOLY | ||
|---|---|---|
PTFE & PTFE Impregnated Packings
Style 154 Pure PTFE | ||
 | A PTFE packing, with PTFE dispersion. It is a dense, firm packing used in valve and slow speed pump applications. This packing has excellent chemical resistance. |
|
Style 154S Pure PTFE | ||
 | A PTFE packing treated with an inert lubricant. This is a soft and resilient packing for chemical pump and valve applications. |
|
Style 154 FDA Pure PTFE | ||
| A food Grade FDA PTFE filament packing, that is food grade, constructed in an interlock braid with an FDA break-in lube. |
|
| Braided PTFE tape - Style 156 | ||
|---|---|---|
Style 182 PTFE Impregnated Aramid | ||
 | A spun aramid fiber with each strand impregnated with PTFE dispersion prior to and after braiding, it also has break-in lubricant. This packing is ideal for valves and pumps in abrasive service. |
|
Style 525T Flax - PTFE | ||
 | A premier marine service packing made with flax fibers and lubricated with PTFE dispersion. This packing has low friction and high tensile strength. It is excellent for water service, paper mill applications and marine stern tube & rudder posts. |
|
Style 1152 PTFE Impregnated Syntex | ||
 | A special syntex fiber packing, with each strand impregnated with a PTFE dispersion. The finished packing also has a break-in lubricant. It is an asbestos replacement packing for general service applications. This packing has good chemical resistance. |
|
Style 1152K PTFE Impregnated Syntex with Kevlar Corners | ||
 | A unique packing combining 1152 and 170 fibers. The aramid corners prevent roll and extrusion. This packing is well suited for abrasive applications and end rings with other packings. |
|
Carbon and Graphite Packings
Style 50 Carbon Yarn with PTFE | ||
 | A carbon yarn packing heavily impregnated with PTFE dispersion. This packing is for severe services in pumps or valves handling chemicals, solvents and acids. It is an ideal packing for paper mill applications. |
|
Style 90 Carbon Yarn with Graphite | ||
 | A carbon yarn packing impregnated with graphite dispersion. This packing is for severe services in pump and valve applications, including super-heated steam, acids, alkalis, etc. |
|
Style 160 Graphite Filament | ||
 | A graphite filament packing impregnated with a graphite dispersion. This packing is recommended for severe service applications where leakage must be held to a minimum. It has excellent chemical resistance. |
|
Style 165 GFO | ||
 | A graphite filled PTFE fiber packing that improves thermal conductivity and will not harden. This packing is commonly called GFO®. It has excellent chemical resistance. |
|
Style 165K GFO with Kevlar Corners | ||
 | A unique aramid packing combining styles 165 and 170 fibers. This packing has aramid corners that prevent roll and extrusion. It is an excellent service packing in severe pump applications. This packing is widely used in paper mills. |
|
Style 3165 | ||
 | A packing made from a special blend of PTFE and graphite fibers plus a high temperature lubricant. It is an economical substitute for style 165. It is a good chemical and abrasion resistant packing. |
|
Aramid, Valve Stem & Fiberglass Packings
Style 170 Aramid Fiber | ||
 | This is an aramid fiber packing with an inert lubricant. It is an extremely durable, highly abrasive resistant packing. This packing is ideal for slurry service. |
|
Style 182 Aramid Fiber with PTFE | ||
 | This is a spun aramid fiber packing with a PTFE dispersion and a break-in lubricant. It is ideal for valves and pumps in abrasive service. |
|
Style 1100TCP Valve Stem Packing | ||
 | A packing braided from pure expanded graphite. It is resilient, self-lubricating, chemically inert and thermally conductive. 1100TCP can be used in both pumps and valves in a wide range of service conditions. |
|
Style 1414 Valve Stem Packing | ||
 | A high temperature packing made from carbon yarn with an inconel wire braided over a resilient core, thoroughly impregnated with graphite and corrosion inhibitor. It has excellent chemical resistance. |
|
Style 1416 Dry Fiberglass Packing | ||
 | This is a texturized fiberglass fiber packing. It is braided dry with no lubricant. This packing will not swell, shrink and is completely incombustible. It is used for sealing oven doors. It has excellent chemical resistance. |
|
Packing Construction
|
|
|
| Square Braid | Interlocked Braid | Braid over Core |