BARBED INSERTS
3500 Series Steel Nipples
| Zinc Plated | Male NPT | Female NPT | |
|---|---|---|---|
| Hose Size | NPT Size | Part # | Part # |
| 1/4" | 1/8" | 3501 | - |
| 1/4" | 1/4" | 3502 | 3542 |
| 1/4" | 3/8" | 3504 | - |
| 3/8" | 1/4" | 3505 | 3545 |
| 3/8" | 3/8" | 3506 | 3546 |
| 3/8" | 1/2" | 3508 | - |
| 1/2" | 1/4" | 3509 | - |
| 1/2" | 3/8" | 3510 | 3550 |
| 1/2" | 1/2" | 3512 | 3552 |
| 1/2" | 3/4" | 3511 | - |
| 3/4" | 1/2" | 3513 | - |
| 3/4" | 3/4" | 3514 | 3554 |
| 3/4" | 1" | 3515 | - |
| 1" | 3/4" | 3516 | - |
| 1" | 1" | 3518 | - |
316 Stainless Steel Inserts
| Hose Size | NPT Size | Part # |
|---|---|---|
| 1/8" | 1/8" | RN11 |
| 3/16" | 1/8" | RN151 |
| 3/16" | 1/4" | RN152 |
| 1/4" | 1/8" | RN21 |
| 1/4" | 1/4" | RN22 |
| 1/4" | 3/8" | RN23 |
| 5/16" | 1/4" | RN252 |
| 3/8" | 1/4" | RN32 |
| 3/8" | 3/8" | RN33 |
| 3/8" | 1/2" | RN34 |
| 1/2" | 1/4" | RN42 |
| 1/2" | 3/8" | RN43 |
| 1/2" | 1/2" | RN44 |
| 1/2" | 3/4" | RN46 |
| 5/8" | 1/2" | RN54 |
| 3/4" | 1/2" | RN64 |
| 3/4" | 3/4" | RN66 |
| 1" | 1" | RKHN881 |
Brass Barbed Inserts
| Brass Inserts | Male NPT | Swivel Male NPT | Rigid Female NPT | Swivel Female NPT | |
|---|---|---|---|---|---|
| Hose Size | NPT Size | Part # | Part # | Part # | Part # |
| 1/8" | 1/8" | BN11 | - | BF11 | BFS11 |
| 3/16" | 1/8" | BN151 | - | - | BFS151 |
| 3/16" | 1/4" | BN152 | - | - | BFS152 |
| 1/4" | 1/8" | BN21 | - | BF21 | - |
| 1/4" | 1/4" | BN22 | BN22SWIV | BF22 | BFS22 |
| 1/4" | 3/8" | BN23 | - | - | - |
| 5/16" | 1/8" | BN251 | - | BF251 | - |
| 5/16" | 1/4" | BN252 | - | BF252 | BFS252 |
| 5/16" | 3/8" | BN253 | - | - | - |
| 3/8" | 1/8" | BN31 | - | BF31 | - |
| 3/8" | 1/4" | BN32 | BN32SWIV | BF32 | BFS32 |
| 3/8" | 3/8" | BN33 | BN33SWIV | BF33 | BFS33 |
| 3/8" | 1/2" | BN34 | - | - | - |
| 1/2" | 1/4" | BN42 | - | - | - |
| 1/2" | 3/8" | BN43 | - | BF43 | - |
| 1/2" | 1/2" | BN44 | - | BF44 | BFS44 |
| 1/2" | 3/4" | BN46 | - | - | - |
| 5/8" | 3/8" | BN53 | - | - | - |
| 5/8" | 1/2" | BN54 | - | - | - |
| 5/8" | 3/4" | BN56 | - | - | - |
| 3/4" | 1/2" | BN64 | - | - | - |
| 3/4" | 3/4" | BN66 | - | - | BFS66 |
| 1" | 3/4" | BN86 | - | - | - |
| 1" | 1" | BN88 | - | - | - |
| Note: The above part numbers are Dixon. At Tampa Rubber and Gasket Co., we distribute for many different manufacturers. If you require a size or configuration not listed, please contact our Customer Service Department for availability. |
Brass Push-On Inserts
Push-On inserts are intended for use with Push-On style hose Only. No hose clamps or ferrules are needed.
| Push-On Inserts | Male NPTF | Rigid Female NPTF | Swivel Female NPSM | Mender | |
|---|---|---|---|---|---|
| Hose Size | NPT Size | Part # | Part # | Part # | Part # |
| 1/4" | 1/8" | BPN21 | - | - | - |
| 1/4" | 1/4" | BPN22 | BPF22 | BPFS22 | BPM2 |
| 1/4" | 3/8" | BPN23 | - | - | - |
| 5/16" | 1/4" | BPN252 | - | - | - |
| 3/8" | 1/8" | BPN31 | - | - | - |
| 3/8" | 1/4" | BPN32 | BPF32 | BPFS32 | - |
| 3/8" | 3/8" | BPN33 | BPF33 | - | BPM3 |
| 3/8" | 1/2" | BPN34 | - | - | - |
| 1/2" | 3/8" | BPN43 | - | - | - |
| 1/2" | 1/2" | BPN44 | - | - | BPM4 |
| 5/8" | 1/2" | BPN54 | - | - | - |
| 3/4" | 1/2" | BPN64 | - | - | - |
| 3/4" | 3/4" | BPN66 | - | - | BPM6 |
| Note: The above part numbers are Dixon. At Tampa Rubber and Gasket Co., we distribute for many different manufacturers. If you require a size or configuration not listed, please contact our Customer Service Department for availability. |
Nylon, Polypropylene and Kynar Inserts
Properties of Nylon, Polypropylene and Kynar
| Nylon inserts are generally acceptable for working pressures up to 150 psi at normal room temperatures. At very low pressures, temperatures can approach 175º F with no degradation of the insert's strength. Nylon inserts should not be used with acid-based fertilizers, bromine, chlorine, fluorine, hydrochloric acid, iodine, nitric acid, phosphoric acid, sulfuric acid or xylene. Nylon should not be used with compressed gas. Parts are white. Polypropylene inserts should not be used with aromatic hydrocarbons, carbon tetra-chloride, gasoline, hexane, kerosene, nitric acid, sodium hydrochlorite, toluene, trichlorethylene or xylene. Polypropylene should not be used with compressed gas. Parts are black. Kynar polyvinylidene fluoride is a tough engineering thermoplastic that offers a unique balance of properties. It has the characteristic stability of fluoropolymers when exposed to harsh thermal, chemical and ultraviolet environments. Parts are tan. |
Important Properties of Kynar Fluoropolymers
|
|
| Plastic Inserts | Nylon | Polypropylene | Kynar | |
|---|---|---|---|---|
| Hose Size | NPT Size | Part # | Part # | Part # |
| 1/4" | 1/8" | TN21 | PPN21 | KN21 |
| 1/4" | 1/4" | TN22 | PPN22 | KN22 |
| 1/4" | 3/8" | TN23 | PPN23 | - |
| 1/4" | 1/2" | TN24 | PPN24 | - |
| 1/4" | 3/4" | TN26 | - | - |
| 1/4" | 1" | TN28 | - | - |
| 5/16" | 1/4" | TN252 | - | - |
| 3/8" | 1/8" | TN31 | PPN31 | - |
| 3/8" | 1/4" | TN32 | PPN32 | KN32 |
| 3/8" | 3/8" | TN33 | PPN33 | KN33 |
| 3/8" | 1/2" | TN34 | PPN34 | KN34 |
| 3/8" | 3/4" | TN36 | PPN36 | - |
| 1/2" | 1/8" | TN41 | - | - |
| 1/2" | 1/4" | TN42 | PPN42 | - |
| 1/2" | 3/8" | TN43 | PPN43 | KN43 |
| 1/2" | 1/2" | TN44 | PPN44 | KN44 |
| 1/2" | 3/4" | TN46 | PPN46 | - |
| 5/8" | 3/8" | TN53 | - | - |
| 5/8" | 1/2" | TN54 | PPN54 | - |
| 5/8" | 3/4" | TN56 | PPN56 | - |
| 5/8" | 3/8" | TN53 | - | - |
| 5/8" | 1/2" | TN54 | PPN54 | - |
| 5/8" | 3/4" | TN56 | PPN56 | - |
| 3/4" | 3/8" | TN63 | - | - |
| 3/4" | 1/2" | TN64 | PPN64 | KN64 |
| 3/4" | 3/4" | TN66 | PPN66 | KN66 |
| 3/4" | 1" | TN68 | PPN68 | - |
| 1" | 3/4" | TN86 | PPN86 | KN86 |
| 1" | 1" | TN88 | PPN88 | KN88 |
| 1-1/4" | 1" | TN158 | - | - |
| 1-1/4" | 1-1/4" | TN150 | PPN150 | - |
| 1-1/4" | 1-1/2" | TN1520 | - | - |
| 1-1/2" | 1-1/4" | TN2015 | - | - |
| 1-1/2" | 1-1/2" | TN200 | PPN200 | - |
| 2" | 2" | TN250 | PPN250 | - |
| Note: Other plastic hose ends and adapters are available; all plastic ends (except Kynar) are sold in package quantities only. Please contact our Customer Service Department for information. |