AIR FITTINGS AND ACCESSORIES
MANIFOLDS, MINI FRL's, MUFFLERS, VALVES
Conical Mufflers |
| Conical Mufflers are easy to install, threading into the exhaust ports of air tool, valves, cylinders and other pneumatic equipment. They offer an economical method of reducing the noise levels below 90 dBA, conforming with OSHA standards. The 40 micron sintered bronze element is bonded directly to the brass pipe thread fitting. NOTE: these elements are not replaceable. | 
|
Muffler / Filters |
| These muffler / filters feature an exclusive replaceable, washable, oil-resistant sintered bronze element and solid brass construction. For use with air valves, air motors, tire changers and other pneumatic equipment. It effectively reduces noise levels to conform to OSHA standards of below 90 dBA with minimal effect on the air flow. | 
|
Mini In-Line Lubricators |
| These lubricators can be refilled under line pressure. Oil capacity is 1/4 fluid ounce. Flow rating is 22 SCFM at 100 PSIG. Aluminum. Maximum operating conditions: 200 PSIG and 175ºF. | 
|
Mini In-Line Filters |
| Filter element is rated at 5 microns. Either port may be used as an inlet port. Flow rating is 17 SCFM inlet pressure at 100 PSIG. Maximum operating conditions: 200 PSIG and 175ºF. | 
|
Aluminum Manifolds |
|  Maximum working pressure is 300 PSI |
3 In 1 Manifolds |
SUGGESTED APPLICATIONS:
| 
|
Safety Pop-Off Valves |
HEAVY DUTY SAFETY POP-OFF VALVE
| High capacity design. ASME Code, National Board Certified Safety Valves are designed to protect un-fired pressure vessels from over-pressure. Equipped with a pull ring for manual testing. Maximum temperature 250ºF. All brass construction with chrome steel ball on a precision machined brass seat. 3-13/16" Long | 
|
STANDARD SAFETY POP-OFF VALVE
| ASME Code, National Board Certified Safety Valves are designed to protect un-fired pressure vessels from over-pressure. Maximum operating temperature is 250ºF (121ºC). All brass construction with chrome steel ball on a precision machined brass seat. Higher flow / SCFM capacity at rated pressure. 3-1/8" Long | 
|
SOFT SEAT SAFETY POP-OFF VALVE
| ASME Code Safety Valve, National Board Certified for compressed air service applications. Designed for Original Equipment Manufacturer, utilizing ASME Code un-fired pressure vessels in their finished product. Constructed of precision machined brass bar stock, with a silicone disc seating on brass. Maximum operating temperature is 400ºF (204ºC). | 
|
Lever Drain Cocks |
For air service only. Lever Drain Cocks are Brass
 |  |  | ||||||||||||
| Female NPT x Male NPT | Male NPT x Male NPT | Female NPT x Female NPT | ||||||||||||
|
|
|
Internal Drain Cocks | Needle Valves |
| Designed for low pressure water and air applications. Maximum working pressure is 150 PSI. Internal drain cocks are brass. | Metal-to-metal seats allow positive sealing and flow adjustment. Designed for air and water applications. Maximum working pressure is 150 PSI. Valves are brass. | |||||||||||||||||
 |  |  | ||||||||||||||||
| Male NPT | Female NPT x Female NPT | Male NPT x Male NPT | ||||||||||||||||
|
|
| ||||||||||||||||
Flow Control Valves |
Series F
| Flow control valves provide precision flow control and full shutoff in one flow direction and automatically allow unrestricted free flow in the opposite direction. Two-step needle provides fine adjustments at low flow with the first three turns of the adjusting knob. The next three turns give full-open needle position and conventional throttling control. When flow is reversed, the heavy-duty poppet / retainer permits full-flow return capacity. Exclusive COLOR-CODED reference scale on the adjusting knob greatly simplifies flow setting, resetting, adjusting and return to an original flow. A simple set screw locks the valve on any desired setting. Maximum operating pressure: Brass - 2000 PSI. | 
|
Series PF
| Utilizes a ball type check that meters flow of air in one direction and allows free flow in the reverse direction. Used to control actuator speed by acting as a restriction. Maximum operating pressure: Brass - 2000 PSI, 5 PSI cracking pressure. | 
|
Series N
| Ideal for use as speed controls on pneumatic systems where a reverse flow check valve is not needed. Provides excellent control and reliable shutoff in a very small envelope. COLOR CODED reference scale on the adjusting knob simplifies setting, resetting, adjusting and quick return to a previous setting. Maximum operating pressure: Brass - 2000 PSI. | 
|
Check Valves - Series C |
| Provides free flow in one direction and dependable shutoff in the opposite direction. Maximum operating pressure: Brass - 2000 PSI, 5 PSI cracking pressure | 
|