STOP IT® PIPE REPAIR SYSTEM

TECHNICAL INFORMATION & PHYSICAL PROPERTIES

STOP IT® PIPE REPAIR TAPE

Compatibility

Generally, STOP IT® may be used with products that are compatible with polyurethane plastic. The end user must always determine the suitability of the product for its intended use and recognize that the durability of the repair may be affected by strong acids or bases.

Chemical Resistance

No visible changes in STOP IT® after an immersion term of 35 days in the following chemicals:
Acetic Anhydride
Ammonia
Ammonium Hydroxide (10%)
Decyl Ammonium Chloride
Diesel Fuel
Diethyl Ether
Ethyl Acetate
Ethyl Ether
Ethylene Glycol
Gasoline		 Hydrochloric Acid (10%)
Lube Oil
4-Methyl 2-Pentanone
Mineral Spirits
Sodium Hydroxide (50%)
Sulfuric Acid (10%)
Sulfuric Acid (25%)
Varsol
Xylenes, Mixed o-, m- and p-

Potable Water

STOP IT® is accepted for use on potable water lines by the WRC (UK). The FIX STIX™ EPOXY included with each kit is NSF certified.

Safety Features

Even under extreme pressures, the STOP IT® Pipe Repair Tape will not shatter or crack. STOP IT® releases pressures slowly. When tested to the failing point in laboratory conditions failure was indicated by a reduction in line pressure and seepage.

Physical Properties

Shelf Life: Two years from date of purchase when stored at 40º to 83ºF (5º to 28ºC)
Color: White or black
Tensile Strength (ASTM D 638-111): 3,920 psi (275 kg/cm²)
Bond Strength (ASTM D 2095-72): 230 psi (16 kg/cm²) average
Flexural Strength (ASTM D 790-1-B): 2,260 psi (159 kg/cm²)
Durometer Hardness (ASTM D 2240): 82 (Shore D)
Pressure Retaining Capability: Recommended for pressures up to 400 psi (28 kg/cm²)
Temperature Resistance:
    Continuous: -20º to 250ºF (-29º to 121ºC)
    Intermittent: 250º to 500ºF (121º to 260ºC)
Set Time: 3 to 5 minutes at 50º to 80ºF (10º to 27ºC)
Cure Time: at 1/2" thick (1.27 cm) - 30 minutes

Ordering Information

Packaged: Ten rolls/case
Product Dimensions:
2 inch x 4 feet (5.08 cm x 1.2 m) - approximate case weight- 4 lbs. (1.8 kg)
2 inch x 12 feet (5.08 cm x 3.6 m) - approximate case weight- 6 lbs. (2.7 kg)
4 inch x 12 feet (10.16 cm x 3.6 m) - approximate case weight- 8 lbs. (3.61 kg)
Case Dimensions: 22" x 9.5" x 4.5" (56 cm x 24 cm x 13 cm)

Military/NSN Order Information

National Stock Numbers (NSN):
4730-01-301-3686 -- 2 inch x 4 feet STOP IT®
4730-01-301-3687 -- 2 inch x 12 feet STOP IT®
4730-01-301-3688 -- 4 inch x 12 feet STOP IT®

FIX STIX™

Physical Properties

Working Time: Two minutes
Set Time: 20 minutes
Maximum Use Temperature: 300ºF (149ºC)
Dielectric Strength: 300 volts/mil at 0.15 cm
Volume Resistivity: 1 x 1012 ohms/cm
Density: 18.5 lb/gal (2.2 gm/cm³)
Compression Strength: 12,000 psi
Tensile Strength: 6,000 psi
Modulus of Elasticity: 6 x 105 psi
Lap Shear Strength (steel): 900 psi
Izod Impact: 0.3 lb/in (notched)
Hardness (Shore D): 80

Ordering Information

Packaged: 28 units/case
Product Dimensions: Each unit 3.6" (9.2 cm) long x 7/8" (2.2 cm) wide
Case Dimensions: 12" x 9" x 5" (31 cm x 23 cm x 13 cm)
Case Weight: 4.75 lbs. (2 kg)

PIPE REPAIR CLAMP

Physical Properties

Adjustment Range: 6" (15.2 cm) down to 11/16" (1.8 cm)
Materials: Band and housing made of corrosion resistant 301 CRES. Heat-treated alloy screw and nut are cadmium plated.

Polytetrafluoroethylene (PTFE) Sealant:
    Material: Temperature range -450ºF to 600ºF (-268ºC to 316ºC)
    Inert to all Chemicals: Only molten alkali metals and elemental fluorine will affect this material.
    Non-aging.
    Will not contaminate flow materials.

Ordering Information


Packaged: Ten clamps per case. Clamps may be combined to fit larger diameter pipe.
Case Dimensions: 12" x 9" x 5" (31 cm x 23 cm x 13 cm)
Case Weight: 2 lbs. (.9 kg)

FUSION TAPE

Physical Properties

Operating Temperatures (Intermittent): -85ºF to 500ºF (-65ºC to 260ºC)
Operating Temperatures (Continuous): -76ºF to 392ºF (-60ºC to 200ºC)
Dielectric Strength, Minimum: 400 volts/mil (.020" thick)
Dielectric Constant, 1 KHz: 2.95
Dissipation Factor, 1 KHz: <.0004
Volume Resistivity: 3 x 1014 ohms/cm
Cold Brittle Point, Maximum: -65ºC
Water Absorption: 3% maximum by weight
Tensile Strength: 700 psi minimum
Ultimate Elongation: 300% minimum
Tear Resistance: 85 ppi
Durometer Hardness: 50 Shore A room cured; meets or exceeds the requirements of MIL-I-46852B.

Ordering Information

Packaged: 12 rolls/case
Product Dimensions: 1" (2.5 cm) wide, 20' (6.1 m) long, 0.020" (.05 cm) thick
Case Dimensions: 12" x 9" x 5" (31 cm x 25 cm x 13 cm)
Case Weight: 2.5 lbs. (1.1 kg)

To Top

Order Now!